feregh.blogg.se - Hp laserjet 1536dnf mfp manual reprint last fax

If the error persists, replace the engine controller PCA. If the error persists, replace the fuser. Make sure that the power source meets the minimum system requirements (40Hz to 70Hz). If the error persists, check the power source. If the error persists, reconnect J101 and J552 on the engine controller PCA. Wait at least 25 minutes, turn the product on, and then wait for the product to initialize. Connect the power cord directly into a wall outlet. If a surge protector is in use, remove it. Press the power button to turn the product off. Description: The product has an internal hardware error.

If the error persists, replace the formatter PCA. If the error persists, disconnect and then reconnect the FFCs and the connectors on the formatter PCA. Wait at least 30 seconds, turn the product on, and then wait for the product to initialize. Plug the power cord directly into a wall outlet. If a surge protector is being used, remove it.

Description: The product has experienced a firmware error.

If the error persists, replace the print cartridge. If the error persists, reconnect the J581 connector on the engine controller PCA. Wait at least 30 seconds, turn the product on, and then wait for the product to initialize. If a surge protector is being used, remove it.

Remedy: - Press the power button to turn the product off.

Description: There is a communication failure with the photosensitive drum.

Remove and reinstall the print cartridge. Verify that the print cartridge is installed correctly.

Description: There is a communication failure with the print cartridge.